Wholesale! ! ! Lowest Price! ! ! V2014.01 Multi-Diag Access J2534 Pass-Thru OBD2 Scanner Tool Multi-Language Diagnostic Interface

Model NO.: J2534 Condition: New Language: English Type: Diagnostic Scanner Power: 2W-5W Trademark: na Specification: Size: 24*22*7cm HS Code: 90318090 Certification: CE Standard: Standard Update Method: by Internet Voltage: 12V Applicable Models: Multi-Brand Cars Transport Package: Bubble Bags Inside, Outside with Carton Packaging Origin: Shenzhen, China

is_customized	Yes
Power	2w-5w
Voltage	12v
Material Type	Plastic And hardware
Language	Multi-languages
Comes with CD disk	Yes

New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device
1. Support 23 brands updated, 5300 new systems (list of systems updated in Multi-Diag since DVD IV-2013).
2.Ideal for independent workshops require a Diagnostic Tool that truly multi-brand delivers in-depth information on a wide range of vehicles.
3.Diagnosis codes from all computers

New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device
 
Top 4 Reasons to Get I-2014 J2534:

1. Latest Version: V2014.01
2. Support Multi-languages: English, Spanish, German, French, Italian, Portuguese, Bulgarian, Croatian, Czech, Danish, Dutch, Finnish, Hebrew, Hungarian, Polish, Romanian, Russian, Serbian, Slovenian, Swedish, Turkish
3. Support 23 Brands Updated, 5300 New Systems
4. Operating System: Windows XP; Windows 7 32bit
 
Installation Multi-diag 1-2014:
 
1). Open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message "successfully installed XXXXXX" and click "OK"
2). Start the installation folder (2) 1-2014 During your installation, if the software request an unlock key 31-xxxxxxxxxx, please contact us with the key to obtain an activation code. 
3). Select the language, then it will continue to install,  please wait until the software complete installation, usually it will take about 30 minutes to 2 hours, how much time to wait it depends on your computer configuration. When the message display saying "Multi-Diag is currently installed with profile ACTIA. Before you can use the program, you must restart your computer." Click "No, I will restart my computer later" and click "Finish" 
4). Go to the following folder C: \ ACTIA \ portal and then delete the file "WEGT.EXE", and clean "Recycle Bin" 
5). After delete this file, open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message saying "successfully installed XXXXXX" and click "OK" 
6). Then install "xs-ime-pt-207p-workshop.exe".  At the step, please connect the device to the car, then use the USB Cable to connect with the computer, then it will prompt to install Pass Thru driver.
7). Go to My Computer - Properties - Hardware - Device Manager, when you find PC- 201411261510 - I+ME ACTIA XS Device and PassThru+ XS USB Driver, it means Multi Diag Access has successfully establish communication with the computer.
Then you can restart the pc.
 
Multi-Diag J2534 Functions:
 
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
 
1. Maintenance
 
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter
 
2. Air Conditioning
 
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators
 
3. Pollution control
 
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe
 
4. Liaison to the ground
 
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)
 
5. Body
 
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar
 
6. Post-Equipment
 
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system
 
7. Braking
 
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.
 
8. Motor
 
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve
 
9. Expert Mode
 
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.
 
V2014.1 Multi Diag Access J2534 System Requirements:
 
*CPU: Pentium/Athlon 1.8 GHz or higher
*RAM: 256 MB of system memory
*Hard Drive: 10 GB of available space
*VCI (vehicle communication Interface)
*DVD-ROM
*No Internet, WIFI
*No Antivirus software

 


 Packaging information  :  Individual packing with box/PE/Antiplastic Bag, a bubble bag for protection, then  brown master carton outside. (Or per client's request)   Shipping Information:  1. For small order, products will be shipped with 1-3 working days. For OEM order, please check the shipping time with us. 4. We can send out goods by express (UPS/DHL/TNT/FEDEX), by air, by sea.  Our customer decides the way for delivery. We always get cheapest freight from forwarder for our customers.   Payment Information: 1. We accept payment by T/T, West Union, PayPal; 2. For big order, 30% T/T as advance, full payment before shipment. For small order, full payment when you place order .  

 

Contact us if you need more details on New Released 2014.01 Version Multi Diag Access J. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Quality Multi Diag J2534、Multi Diag J2534. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Auto Diagnostic Tools